GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Blazer - 4WD - RHD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Turn Signal Multifunction Switch Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.


    Object Number: 365530 Size: SH
  1. Disable the SIR system. Refer to SIR Disabling and Enabling in SIR.
  2. Remove the upper steering column trim cover. Refer to Steering Column Trim Covers Replacement .
  3. Disconnect the electrical connections to the turn signal switch.
  4. Remove the turn signal switch.
    5. 4.1. Squeeze the top and bottom retaining tabs as shown in illustration.
    4.2. Hold the turn signal switch by the stalk and pull out to the right of side of vehicle.

Installation Procedure

    Object Number: 365530 Size: SH

    Important: Ensure that the turn signal switch retaining tabs click into position.

  1. Install the turn signal switch to the steering column.
  2. Connect the electrical connectors to the turn signal switch.
  3. Install the upper steering column trim cover. Refer to Steering Column Trim Covers Replacement .
  4. Enable the SIR system. Refer to SIR Disabling and Enabling in SIR.