Rear Window Washer Nozzle Hose Replacement Endgate

1. Remove the endgate trim panel. Refer to Endgate Trim Panel Replacement in Body Rear End.



2. Disconnect the hose from the endgate harness.
3. Disconnect the hose from the endgate inner panel.
4. Remove the 2 clips that secure the hose to the endgate.

1. Apply lubricant to both ends of the hose.
2. Install the hose to the endgate inner panel using 2 hose clips.
3. Connect the hose to the endgate harness.
4. Connect the hose to the endgate inner panel.
5. Install the endgate trim panel. Refer to Endgate Trim Panel Replacement in Body Rear End.