GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Blazer - 4WD - RHD 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Third Pillar Trim Replacement

Removal Procedure
  1. Remove the rear door sill trim plate. Refer to Door Sill Plate Replacement .
  2. Remove the lower rear seat belt bolt.

    3. Object Number: 303406 Size: SH
  3. Remove the C-pillar lower trim panel from the vehicle.

Installation Procedure

    Object Number: 303406 Size: SH
  1. Install the C-pillar lower trim panel to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the lower seat belt bolt.

    3. Tighten
    Tighten the bolt to 70 N·m (52 lb in).

  3. Install the rear door sill trim plate. Refer to Door Sill Plate Replacement .