GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2003
🢒
Blazer - 4WD - RHD
🢒
Body and Accessories
🢒
Exterior Trim
🢒 Front Bumper Fascia Air Deflector Replacement
Front Bumper Fascia Air Deflector Replacement Low Trim
Removal Procedure
Remove the front bumper from the vehicle. Refer to
Front Bumper Impact Bar Replacement
.
Remove the license plate bracket, if equipped. Refer to
Front License Plate Bracket Replacement
.
Remove the retainers from each end of the deflector.
Pull the air deflector snap retainers from the slots in the bumper.
Remove the deflector from the vehicle.
Remove the fog lamps from the deflector, if equipped. Refer to
Front Parking and Turn Signal and Fog Lamp Assembly Replacement
in Lighting Systems.
Installation Procedure
Install the fog lamps to the deflector, if equipped. Refer to
Front Parking and Turn Signal and Fog Lamp Assembly Replacement
in Lighting Systems.
Install the deflector to the vehicle. Ensure that the snap retainers lock into position.
Install the license plate bracket, if equipped. Refer to
Front License Plate Bracket Replacement
.
Install two air deflector retainers, one on either end of the deflector.
Install the front bumper to the vehicle. Refer to
Front Bumper Impact Bar Replacement
.
Front Bumper Fascia Air Deflector Replacement High Trim
Removal Procedure
Remove the front bumper from the vehicle. Refer to
Front Bumper Impact Bar Replacement
.
Remove the license plate bracket, if equipped. Refer to
Front License Plate Bracket Replacement
.
Remove 6 retainers from the deflector.
Pull the air deflector snap retainers from the slots in the bumper.
Remove the deflector from the vehicle.
Remove the fog lamps from the deflector, if equipped. Refer to
Front Parking and Turn Signal and Fog Lamp Assembly Replacement
in Lighting Systems.
Installation Procedure
Install the fog lamps to the deflector, if equipped. Refer to
Front Parking and Turn Signal and Fog Lamp Assembly Replacement
in Lighting Systems.
Install the deflector to the vehicle. Ensure that the snap retainers lock into position.
Install the license plate bracket, if equipped. Refer to
Front License Plate Bracket Replacement
.
Install 6 air deflector retainers.
Install the front bumper to the vehicle. Refer to
Front Bumper Impact Bar Replacement
.