GM Service Manual Online
For 1990-2009 cars only

Front Bumper Fascia Air Deflector Replacement Low Trim

Removal Procedure


    Object Number: 594022  Size: SH
  1. Remove the front bumper from the vehicle. Refer to Front Bumper Impact Bar Replacement .
  2. Remove the license plate bracket, if equipped. Refer to Front License Plate Bracket Replacement .
  3. Remove the retainers from each end of the deflector.
  4. Pull the air deflector snap retainers from the slots in the bumper.
  5. Remove the deflector from the vehicle.
  6. Remove the fog lamps from the deflector, if equipped. Refer to Front Parking and Turn Signal and Fog Lamp Assembly Replacement in Lighting Systems.

Installation Procedure


    Object Number: 594022  Size: SH
  1. Install the fog lamps to the deflector, if equipped. Refer to Front Parking and Turn Signal and Fog Lamp Assembly Replacement in Lighting Systems.
  2. Install the deflector to the vehicle. Ensure that the snap retainers lock into position.
  3. Install the license plate bracket, if equipped. Refer to Front License Plate Bracket Replacement .
  4. Install two air deflector retainers, one on either end of the deflector.
  5. Install the front bumper to the vehicle. Refer to Front Bumper Impact Bar Replacement .

Front Bumper Fascia Air Deflector Replacement High Trim

Removal Procedure


    Object Number: 624848  Size: SH
  1. Remove the front bumper from the vehicle. Refer to Front Bumper Impact Bar Replacement .
  2. Remove the license plate bracket, if equipped. Refer to Front License Plate Bracket Replacement .
  3. Remove 6 retainers from the deflector.
  4. Pull the air deflector snap retainers from the slots in the bumper.
  5. Remove the deflector from the vehicle.
  6. Remove the fog lamps from the deflector, if equipped. Refer to Front Parking and Turn Signal and Fog Lamp Assembly Replacement in Lighting Systems.

Installation Procedure


    Object Number: 624848  Size: SH
  1. Install the fog lamps to the deflector, if equipped. Refer to Front Parking and Turn Signal and Fog Lamp Assembly Replacement in Lighting Systems.
  2. Install the deflector to the vehicle. Ensure that the snap retainers lock into position.
  3. Install the license plate bracket, if equipped. Refer to Front License Plate Bracket Replacement .
  4. Install 6 air deflector retainers.
  5. Install the front bumper to the vehicle. Refer to Front Bumper Impact Bar Replacement .