Tools Required

J 34940 Rivet Gun

Important: The rear door power window motor and regulator replacement parts are sold as an assembly. Do not attempt to separate the motor from the regulator before verifying that separate replacement parts are available.

1. Remove the window. Refer to Rear Side Door Window Replacement .
2. Disconnect the power window motor electrical connector, if equipped.
3. Remove the electrical harness retainers, if equipped.



4. Drill out the rivets that secure the window regulator to the door.
5. Remove the window regulator and or the motor assembly from the door.

1. Install the window regulator and the motor assembly (power windows only) to the door.
2. Install the rivets that secure the window regulator to the door.
3. Install the electrical harness retainers, if equipped.
4. Install the window. Refer to Rear Side Door Window Replacement .