FLYWHEEL-CONVERTER BOLTS REVISED TORQ SPECIFICATIONS

Model and Year ALL 1984 AND LATER WITH AUTOMATIC TRANSMISSIONS

Flywheel to torque converter bolt torque has been changed from 40-54 N.m (35-40 lb. ft.) to 55-70 N.m (41-52 lb. ft.). Also retorque the first bolt after all three (3) have been torqued.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.