SHUDDER DURING CLUTCH RELEASE INSTALL NEW SQUARE SPACER

Some 1983 Camaro vehicles equipped with a 2.5L engine and manual transmission may exhibit a shudder condition while releasing the clutch in reverse gear.

To correct this condition, install spacers (P/N 10031852) in locations shown in illustration.

If the vehicle has a washer underneath the original spacer, it must not be reinstalled under the new square spacer.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.