UNEVEN FRONT TIRE WEAR TOE SPECIFICATION CHANGE

MODEL AND YEAR: 1982-87 CAMARO

Some 1982-87 Camaros may experience uneven tire wear on the outer ribs of the front tires.

To eliminate or minimize this condition, check the sum toe setting on an alignment machine. The sum toe should be set to .10 degrees +/- .20 degrees.

The sum toe specification was changed from .30 degrees, +/- .20 degrees, to .10 degrees +/- .20 degrees for both factory and service settings starting with the VIN breakpoints below:

PLANT VIN

Van Nuys HL113111

Norwood HN124400

Use applicable Labor Operation Number and Time.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.