SERVICE MANUAL UPDATE-SEC. 7C CLUTCH HOUSING / ENG. FASTENER

subject: CLUTCH HOUSING-TO-ENGINE FASTENER TORQUES

Model and Year: 1989-91 CAMARO

TO: ALL CHEVROLET DEALERS

This information should be added to the 1989-91 Camaro Service Manual - Section 7C.

The updated Clutch Housing-to-Engine Fastener Torques (Section 7C) were changed to the following:

V6 Engines

Bolt torques were changed from 47 N.m (35 lbs.ft.) to 95 N.m (70 lbs. ft.).

V8 Engines

Bolt torques were changed from 95 N.m (70 lbs. ft.) to 47 N.m (35 lbs. ft.).

See attached copy of the updated Service Manual page.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.