Condition: Some owners may comment that the clutch pedal contacts the edge of hush panel.
Cause: Hush panel and or clutch pedal slightly mispositioned due to build variation.
Correction: Remove left side (driver side) hush panel. Using a sharp cutting tool trim off approximately 1/8 inch material from edge of hush panel where clutch makes contact. (See Illustration).
Labor Operation Number: T 1732 Labor Time: .2 Hour Trouble Code: 92
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.