CONDENSATION IN FRONT PARK/ TURN SIGNAL LAMPS

Subject: CONDENSATION IN FRONT PARK/TURN SIGNAL LAMPS

Model and Year: 1986-91 CAMARO

TO: ALL CHEVROLET DEALERS

CONDITION:

Condensation/water in front park/turn lamps.

CAUSE:

Water collects on fascia surface and enters lamp through lamp drain hole.

CORRECTION:

Notch fascia as outlined in the following procedure.

1. Remove front park/turn lamp as outlined in the Service Manual.

2. Using a small fine tooth hand saw, notch facia in lamp opening as shown in Figure 1.

3. Reinstall lamp.

4. Repeat for other side if necessary.

Labor Operation Number: T1652 Right Side T1653 Left Side

Labor Time: 0.4 Hours 0.4 Hours

FAILURE CODE: 92

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.