------------ Left side instrument panel rattle
------ Headlamp switch hits trim plate
----------- Remove rod/knob assembly as outlined in Service Manual. Enlarge hole in trim plate to 8.5mm (5/16 inch) and install rubber grommet (P/N #10181816). Reverse Service Manual procedures to reinstall rod/knob assembly.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.