GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Camaro 🢒 Engine 🢒 Engine Mechanical - 3.8L 🢒 Exhaust Gas Recirculation Valve Outlet Pipe Replacement

Removal Procedure

    Object Number: 36609 Size: SH
  1. Remove the EGR valve outlet pipe bolt.
  2. Remove the EGR valve outlet pipe nut.
  3. Remove the EGR valve outlet pipe.

Installation Procedure

    Object Number: 36609 Size: SH
  1. Install the EGR valve outlet pipe.
  2. Install the EGR outlet nut.

    3. Tighten
    Tighten the nut to 29 N·m (21 lb ft).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the EGR outlet bolt.

    4. Tighten
    Tighten the bolt to 29 N·m (21 lb ft).