DEFINITION:

The 6-speed transmission does not shift smoothly into reverse gear or will not shift into reverse gear.

1. Turn the ignition switch to the RUN position.
2. Check for voltage at the reverse lockout solenoid electrical connector.

Is there voltage at the connector?

12 volts

Go to Step 2

Go to Step 5

1. Remove the reverse lockout solenoid assembly from the reverse lockout assembly. Refer to Reverse Lockout Solenoid .
2. Apply 12 volts to the solenoid electrical connector

Is the solenoid plunger extended?

--

Go to Step 3

Go to Step 6

Remove the reverse lockout assembly from the transmission. Refer to Reverse Lockout Solenoid .

Can you easily depress the reverse lockout plunger with your thumb?

--

Go to Step 4

Go to Step 7

1. Remove the transmission. Refer to Transmission Removal or to Transmission Removal .
2. Disassemble the transmission. Refer to Transmission Disassemble or to Transmission Disassemble .
3. Look for the following list of causes:

•	Worn or broken shift linkage parts

•	A worn or damaged synchronizer sleeve or hub

4. Replace all worn or damaged parts.

--

--

--

Repair the reverse lockout solenoid circuit. Refer to SECTION 8A.

Is the circuit OK?

--

Go to Step 1

--

Replace the solenoid.

Does the transmission shift OK now?

--

System OK

--

Repair or replace the reverse lockout assembly. Refer to Reverse Lockout Solenoid .

Does the transmission shift OK now?

--

System OK

--