For 1990-2009 cars only
The DTCs in the EBCM/EBTCM memory are erased in one of two ways:
| • | Scan tool method. |
| • | Ignition cycle default. This requires 100 ignition cycles to pass with no detection of the DTC. |
| Important: After DTC C0036, C0041, C0046, C0051, C0056, and C0110 are cleared by ignition cycle default the vehicle must be driven above 12 Km/h (8 mph) for the ABS/TCS indicator(s) to turn off. |
Whichever method is used, be sure to verify proper system operation and absence of DTCs when the clearing procedure is completed.
DTCs cannot be cleared by unplugging the EBCM/EBTCM, disconnecting the battery cables, or by turning the ignition OFF (except on the 100th cycle of ignition cycle default without the malfunction reappearing).
