GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Camaro 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Parking and Turn Signal Lamp Replacement

Parking and Turn Signal Lamp Replacement Chevrolet

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Open the access door in the front bumper air deflector.

    3. Object Number: 294760 Size: SH
  3. Disconnect the following connectors from the sockets:
    4. • The sidemarker lamp
    • The park and turn signal lamp

    Object Number: 294761 Size: SH
  4. Remove the park and turn signal lamp bolts.
  5. Remove the park and turn signal lamp from the front bumper fascia.

Installation Procedure

    Object Number: 294761 Size: SH
  1. Install the park and turn signal lamp to the front bumper fascia.
  2. Install the park and turn signal lamp bolts.

    3. Tighten
    Tighten the park and turn signal lamp bolts to 2.5 N·m (22 lb in).


    Object Number: 294760 Size: SH
  3. Connect the following connectors to the sockets:
    4. • The sidemarker lamp
    • The park and turn signal lamp
  4. Close the access door in the front bumper air deflector.
  5. Lower the vehicle.

Parking and Turn Signal Lamp Replacement Pontiac Firebird

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Open the access door in the front bumper air deflector.
  3. Disconnect the electrical connector from the park and turn signal lamp.

    4. Object Number: 294763 Size: SH
  4. Remove the park and turn signal lamp nuts.
  5. Remove the park and turn signal lamp (2) from the fascia.

Installation Procedure

    Object Number: 294763 Size: SH
  1. Install the park and turn signal lamp (2) to the fascia.
  2. Install the park and turn signal lamp bolts.

    3. Tighten
    Tighten the park and turn signal lamp nuts to 4 N·m (35 lb in).

  3. Connect the electrical connector to the park and turn signal lamp.
  4. Close the access door in the front bumper air deflector.
  5. Lower the vehicle.

Parking and Turn Signal Lamp Replacement Pontiac Trans Am

Removal Procedure
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Open the access door in the front bumper air deflector.
  3. Disconnect the electrical connector from the park and turn signal lamp.

    4. Object Number: 366720 Size: SH
  4. Remove the park and turn signal lamp bolts.
  5. Remove the park and turn signal lamp from the fascia.

Installation Procedure

    Object Number: 366720 Size: SH
  1. Install the park and turn signal lamp to the fascia.
  2. Install the park and turn signal lamp bolts.

    3. Tighten
    Tighten the park and turn signal lamp bolts to 2.5 N·m (22 lb in).

  3. Connect the electrical connector to the park and turn signal lamp.
  4. Close the access door in the front bumper air deflector.
  5. Lower the vehicle.