Headlamp Door Module Replacement for Chevrolet Camaro 1998

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.



2. Disconnect the headlamp door opening actuator control module electrical connectors.



3. Remove the headlamp door opening actuator control module from the forward lamp harness bracket .

1. Install the headlamp opening door actuator control module to the forward lamp harness bracket.
2. Slide the module into the bracket until module locks into place.



3. Connect the headlamp opening door actuator control module electrical connectors.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.