GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the entire Power Antenna System Check performed?

--

Go to Step  2

Go to Power Antenna System Check

2

  1. Disconnect the radio power antenna connector.
  2. Turn the ignition switch to the ACCY position.
  3. Turn the radio on.
  4. Connect a test light between terminal A of the radio power antenna connector and ground.

Does the test light illuminate?

--

Go to Step  3

Go to Step  4

3

Connect the test light between the radio power antenna connector terminals A and C.

Does the test light illuminate?

--

Go to Step  5

Go to Step  6

4

Repair the poor connection or open in circuit 1040.

Is the repair complete?

--

Go to Step  11

--

5

Connect the test light between the radio power antenna connector terminals B and C.

Does the test light illuminate?

--

Go to Step  7

Go to Step  8

6

Repair the poor connection or open in circuit 650.

Is the repair complete?

--

Go to Step  11

--

7

Replace the radio power antenna. Refer to Power Antenna Mast Replacement .

Is the repair complete?

--

Go to Step  11

--

8

Check for an open in circuit 314.

Is an open present?

--

Go to Step  9

Go to Step  10

9

Repair the poor connection or open in circuit 314.

Is the repair complete?

--

Go to Step  11

--

10

Replace the radio. Refer to Radio Replacement .

Is the repair complete?

--

Go to Step  11

--

11

  1. Turn the ignition switch to the OFF position.
  2. Reconnect all connectors/components removed.

Have all the repairs been made?

--

Go to Power Antenna System Check

--