GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Camaro 🢒 Body and Accessories 🢒 Entertainment 🢒 Remote CD Changer Replacement

Remote CD Changer Replacement Coupe

Removal Procedure

    Object Number: 379387 Size: SH
  1. Open the rear compartment lift window panel.
  2. Remove the CD magazine from the CD player.

    3. Object Number: 296690 Size: SH
  3. Remove the CD changer mounting nut (1).
  4. Disconnect the CD changer electrical connector (3).
  5. Remove the CD changer (2).

    6. Object Number: 379386 Size: SH
  6. Remove the bolts and the brackets from the CD changer, as needed.
  7. If you will transport or ship the CD changer, reinstall the shipper pin. Insert the pin into the top of the changer. Use tape in order to fix the pin in place.
  8. If you install a new CD changer, remove the shipper pin. Cover the hole with the supplied adhesive material.

Installation Procedure

    Object Number: 379386 Size: SH
  1. Install the brackets and the bolts to the CD changer, as needed.

    2. Tighten
    Tighten the CD changer bracket bolts to 1.9 N·m (17 lb in).


    Object Number: 296690 Size: SH
  2. Install the CD changer (2).
  3. Connect the CD changer electrical connector (3).
  4. Position the outboard stud through the bracket hole.
  5. Position the outboard hole over the stud.
  6. Install the CD changer mounting nut (1).

    7. Tighten
    Tighten the CD changer mounting nut (1) to 2.5 N·m (22 lb in).


    Object Number: 379387 Size: SH
  7. Install the CD magazine to the CD changer.
  8. Close the rear compartment lift window panel.

Remote CD Changer Replacement Convertible

Removal Procedure

    Object Number: 379387 Size: SH
  1. Open the trunk.
  2. Remove the CD magazine from the CD player.

    3. Object Number: 362240 Size: SH
  3. Remove the CD changer mounting nut.
  4. Disconnect the CD changer electrical connector.
  5. Remove the CD changer.

    6. Object Number: 379386 Size: SH
  6. Remove the bolts and brackets from the CD changer, as needed.
  7. If you will transport or ship the CD changer , reinstall the shipper pin. Insert the pin into the top of the changer. Use tape in order to fix the pin in place.
  8. If you install a new CD changer, remove the shipper pin. Cover the hole with the supplied adhesive material.

Installation Procedure

    Object Number: 379386 Size: SH
  1. Install the brackets and the bolts to the CD changer, as needed.

    2. Tighten
    Tighten the CD changer bracket bolts to 1.9 N·m (17 lb in).


    Object Number: 362240 Size: SH
  2. Install the CD changer.
  3. Connect the CD changer electrical connector.
  4. Position the inboard stud through the bracket hole.
  5. Position the inboard hole over the stud.
  6. Install the CD changer mounting nut.

    7. Tighten
    Tighten the CD changer mounting nut to 2.5 N·m (22 lb in).


    Object Number: 379387 Size: SH
  7. Install the CD magazine to the CD changer.
  8. Close the trunk.