GM Service Manual Online
For 1990-2009 cars only

Cruise control is a speed control system that maintains a desired vehicle speed under normal driving conditions. Steep grades may cause variations in the selected speeds.

The cruise control system performs the following functions:

    • Cruise
    • Coast
    • Resume speed
    • Accelerate
    • Incrementally raise or lower speeds 1.6 km/h (1 mph)

The following components are the primary components of the cruise control system:

    • The functional control switches
    • The cruise control module
    • The vehicle speed sensor
    • The cruise control release switch
    • The stoplamp and torque converter clutch (TCC) switch
    • The cruise control switches
    • The cruise control switch wiring harnesses

The cruise control system uses a cruise control module in order to obtain the desired vehicle cruise operation. The cruise control module is mounted on the left engine compartment inner side rail. The module contains the electronic controller and the electric stepper motor. The cruise control module contains a low speed limit that will prevent system engagement below a minimum speed of 40 km/h (25 mph). The module is not serviceable. The module uses the following 2 important components for cruise operation:

  1. An electronic controller
  2.  - The controller monitors the vehicle speed.
     - The controller operates the electric stepper motor.
  3. An electric stepper motor
  4.  - The electric stepper motor moves a ribbon and the throttle linkage in order to maintain the desired cruise speed.
     - Movement to the ribbon and the throttle linkage is in response the electronic controller.

The cruise control operations are located on the multifunction turn signal lever.

The following cruise control switches disengage the cruise control system:

    • The release (brake) switch
    • The stoplamp and TCC switch
    • The clutch switch or the clutch anticipate switch

These switches are mounted on the following components:

    • The brake pedal bracket
    • The clutch pedal bracket

When the brake pedal or clutch pedal is depressed, the following actions occur:

    • The cruise control system is electrically disengaged.
    • The throttle returns to the idle position.

If the vehicle is equipped with traction control (acceleration slip regulation), the cruise control will disengage in a low traction situation.