Tools Required

J 39346-A Mini-Wedge Door Striker Aligner

Important: Door must be properly aligned before adjusting the striker.

1. Loosen door lock striker bolts/screws (1) just enough to allow movement of the lock striker (2).
2. Install J 39346-A to the lock striker (2).

Important: Do not slam door.

3. Close the door while holding the outside handle in the open position.
4. Open the door.
5. Retighten the lock striker bolts.

Tighten
Tighten the door lock striker bolts/screws (1) to 29 N·m (21 lb ft).

6. Remove J 39346-A .