GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1998 🢒 Camaro 🢒 Body and Accessories 🢒 Exterior Trim 🢒 Front Fender Rear Molding Replacement

Removal Procedure

    Object Number: 369114 Size: SH
  1. Remove the old molding from the front fender.
  2. Mark the position of the molding with a length of masking tape.
  3. Wash the area with soapy water and wipe dry.
  4. Remove all traces of adhesive using a oil-free naptha or alcohol.

Installation Procedure

    Object Number: 369117 Size: SH
  1. Remove the backing paper from the molding.
  2. Measure 2.5-4.5 mm (0.1-0.18 in) from the rear edge of the fender (1) to the inside of the molding.
  3. Measure 3.5 mm (0.14 in) from the rear of the molding to the edge of the door (2).
  4. Align the molding to the guideline and press firmly in place.