Release Actuator Replacement for Chevrolet Camaro 1998

1. Open the window panel.
2. Open the rear compartment trim, as needed. Refer to Rear Compartment Trim.



3. Disconnect the electrical connector from the switch.
4. Remove/disconnect the following components from the actuator:

•	The secondary lock retainer

•	The electrical connector

5. Remove the endgate latch. Refer to Endgate Latch Replacement .
6. Remove the bolts.
7. Remove the switch from the latch.

1. Insert the switch to the latch.
2. Install the bolts.
3. Install the endgate latch. Refer to Endgate Latch Replacement .
4. Install/connect the following components to the actuator:

•	The secondary lock retainer

•	The electrical connector

5. Connect the electrical connector to the switch.
6. Install the rear compartment trim. Refer to Rear Compartment Trim.