External Component Disassemble for Chevrolet Camaro 1998

1. Use a solvent and a stiff brush to clean the transfer case exterior.
2. Remove the following components from the front output shaft:

•	The front nut

•	The washer

•	The rubber sealing washer

•	The front output flange

3. Remove the four-wheel drive actuator switch and the O-ring seal.



4. Remove the vehicle speed sensor and the O-ring seal.



5. Remove the following components:

5.1.	The detent plug

5.2.	The O-ring seal

5.3.	The detent spring

5.4.	The detent plunger