Fuel Tank Pressure Sensor Replacement for Chevrolet Camaro 1999

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
2. Drain fuel tank. Refer to Fuel Tank Draining .
3. Raise the vehicle. Go to Lifting and Jacking the Vehicle in general information.
4. Remove the fuel tank. Refer to Fuel Tank Replacement .
5. Remove the electrical connector from the fuel tank pressure sensor.
6. Remove the fuel tank pressure sensor (10) from the modular fuel sender.

1. Install the new fuel tank pressure sensor (10) to the modular fuel sender.
2. Connect the electrical connector to the fuel tank pressure sensor.
3. Reinstall the fuel tank. Refer to Fuel Tank Replacement .
4. Refill the fuel tank.
5. Reconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in engine electrical.
6. Inspect for fuel leaks.

6.1.	Turn the ignition switch ON for 2 seconds.

6.2.	Turn the ignition switch OFF for 10 seconds.

6.3.	Turn the ignition switch ON.

6.4.	Check for fuel leaks.