Extension Housing Rear Oil Seal for Chevrolet Camaro 2000

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the propeller shaft. Refer to One-Piece Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement in Propeller Shaft.



3. Remove the case extension oil seal.

Use a flat bladed tool to pry the seal from the housing.

Tools Required

J 21426 Extension Housing Seal Installer

1. Use the J 21426 and a soft face hammer, install the case extension oil seal.
2. Install the propeller shaft. Refer to One-Piece Propeller Shaft Replacement or Two-Piece Propeller Shaft Replacement in Propeller Shaft.
3. Lower the vehicle.
4. Check the transmission fluid level.