Removal Procedure
- Remove the fuel sender
assembly. Refer to
Fuel Sender Assembly Replacement
.
- Note the position of the fuel strainer (4) on the fuel pump.
- Support the fuel sender assembly with one hand and grasp the strainer
(4) with the other hand.
- Pull the strainer off the pump. Discard the strainer after inspection.
- Inspect the strainer. Replace a contaminated strainer and clean
the fuel tank.
Installation Procedure
- Install a new fuel strainer
(4) in the same position as noted during disassembly. Push the strainer on
the bottom of the fuel sender until the strainer is fully seated.
- Install the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.