Radiator Inlet Hose Replacement 3.8LEngine

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Disconnect the intake air temperature sensor electrical connector.



3. Loosen the intake air duct clamp.
4. Remove the intake air duct resonator.



5. Reposition the radiator inlet hose clamp from the water outlet.
6. Remove the radiator inlet hose from the water outlet.



7. Reposition the radiator inlet hose clamp from the radiator.
8. Remove the radiator inlet hose (1) from the radiator.

1. Install the radiator inlet hose (1) to the radiator.
2. Reposition the radiator inlet hose clamp to the radiator.



3. Install the radiator inlet hose to the water outlet.
4. Reposition the radiator inlet hose clamp to the water outlet.



5. Install the intake air duct resonator.
6. Tighten the intake air duct clamp.



7. Connect the intake air temperature sensor electrical connector.
8. Fill the cooling system. Refer to Cooling System Draining and Filling .

Radiator Inlet Hose Replacement 5.7LEngine

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Disconnect the following electrical connectors:

•	Intake air temperature sensor

•	Mass airflow sensor




3. Remove the air cleaner outlet duct.



4. Reposition the radiator inlet hose clamp from the radiator.
5. Remove the radiator inlet hose (1) from the radiator.



6. Reposition the inlet hose clamps from the power steering cooler, if equipped.
7. Remove the inlet hoses from the power steering cooler, if equipped.



8. Reposition the radiator inlet hose clamp from the water pump.
9. Remove the radiator inlet hose from the water pump.

1. Install the radiator inlet hose to the water pump.
2. Reposition the radiator inlet hose clamp to the water pump.



3. Install the inlet hoses to the power steering cooler, if equipped.
4. Reposition the radiator inlet hose clamps at the power steering cooler, if equipped.



5. Install the radiator inlet hose (1) to the radiator.
6. Reposition the inlet hose clamp to the radiator.



7. Install the air cleaner outlet duct.



8. Connect the following electrical connectors:

•	Intake air temperature sensor

•	Mass air flow sensor

9. Fill the cooling system. Refer to Cooling System Draining and Filling .