Rear Wheel Speed Sensor Wiring Harness Replacement W/O Traction Control

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Disconnect the wheel speed sensor electrical connector.
3. Remove the rear wheel speed sensor jumper harness grommet (1) from the retainer.
4. Remove the upper harness connector from the rear body pass-through connector.

1. Install the upper harness connector from the rear body pass-through connector.
2. Install the rear wheel speed sensor jumper harness grommet (1) to the retainer (4).
3. Connect the wheel speed sensor electrical connector.
4. Lower the vehicle.

Rear Wheel Speed Sensor Wiring Harness Replacement W/Traction Control

1. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Disconnect the wheel speed sensor electrical connectors (2,3).
3. Remove the jumper harness grommet from the retainer.
4. Remove the upper jumper harness connector from the rear body pass-through connector.

1. Install the upper jumper harness connector to the rear body pass-through connector.
2. Install the jumper harness grommet to the retainer.
3. Connect the wheel speed sensor electrical connectors (2), and (3).
4. Lower the vehicle.