GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Camaro 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Actuator Replacement

Removal Procedure

    Object Number: 760501 Size: SH
  1. Remove the park brake shoe (1). Refer to Parking Brake Shoe Replacement .

    2. Object Number: 338243 Size: SH
  2. Move the brake lever back and forth in order to remove the following components:
    3. • The tappet
    • The pushrod
    • The adjusting screw
    • The actuator lever

Installation Procedure

    Object Number: 338243 Size: SH
  1. Push the park brake actuator lever into the housing.
  2. Apply chassis lubricant to the pushrod, tappet, and adjusting screw.

    3. Important: Check operation by pinching the tappet and adjusting screw together and moving the brake lever. One or both tappets must extend. With the tappets pinched together, the brake lever must feel firmly seated. You must not be able to pull out the lever.

  3. Install the pushrod, tappet, and the adjusting screw.

    4. Object Number: 64007 Size: SH
  4. Install the park brake shoe. Refer to Parking Brake Shoe Replacement .