Compressor Control Valve Assembly Install V7 - Direct Mount

Tools Required

J 41790-A A/C Compressor Holding Fixture

1. Coat the control valve O-ring with clean 525 viscosity refrigeration oil.
2. Push the A/C compressor control valve into the A/C compressor with thumb pressure.
3. Using internal snap ring pliers, install the A/C compressor control valve retaining ring.

Make sure the retaining ring is properly seated in the ring groove.

4. Remove the A/C compressor from the J 41790-A .
5. Install the A/C compressor into the vehicle.

Compressor Control Valve Assembly Install V5 - Conventional Mount

Tools Required

J 5403 Snap Ring Pliers

1. Coat the O-rings with 525 viscosity refrigeration oil.
2. Using thumb pressure, push the O-rings in place.
3. Install the valve into the case.

Important: Ensure that the retaining ring is properly seated in the ring groove.

4. Using the J 5403 , install the valve retaining ring (5) with the high point of the curved sides against the valve housing.
5. Perform a leak test. Refer to Compressor Leak Testing .