GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 365459  Size: SH
  1. Remove the instrument panel (IP) carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.
  2. Remove the IP outer air outlet duct bolts.
  3. Remove the IP outer air outlet duct.

Installation Procedure


    Object Number: 365459  Size: SH
  1. Install the IP outer air outlet duct.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the IP outer air outlet duct bolts.
  4. Tighten
    Tighten the IP outer air outlet duct bolts to 2.2 N·m (19 lb in).

  5. Install the IP carrier. Refer to Instrument Panel Carrier Replacement in Instrument Panel, Gages and Console.