Rear Compartment Lift Window Panel Adjustment. Chevrolet Camaro 2002

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2002 🢒 Camaro 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lift Window Panel Adjustment

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Perform the following steps in order to adjust the window panel flush to the quarter outer panel:

1.1.	Center the window in the opening.

1.2.	Open the window panel.

1.3.	Move the rear compartment trim as needed. Refer to Liftgate Trim Panel Replacement .

1.4.	Loosen the bolts.

1.5.	Close the window panel.

1.6.	Move the window panel as needed.

1.7.	Tighten the bolts.

Tighten
Tighten the bolts to 10 N·m (89 lb in).

Adjust the window panel flush to the quarter trim finish panel.
Loosen or tighten the bumpers as needed (2).