| Table 1: | IPC Scan Tool Data List |
| Table 2: | PCM Scan Tool Data List |
The scan tool data lists contain all the instrument panel, gages, and console related parameters that are available on the scan tool. The parameters in the list are arranged in order, as they appear on the scan tool. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with the Diagnostic System Check - Instrument Cluster for the Instrument Panel Cluster or Symptoms - Instrument Panel, Gages and Console for audible warnings.
Use the scan tool data lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF, Lights Off, Hatch Closed, Park Brake Not Set | |||
8-Digit GM Part Number | Module Information | Numeric | Varies |
ABS Inop Lamp | Inputs | On/Off | Off |
Air Bag Lamp | Inputs | On/Off | Off |
Brake: Class 2 Input | Lamp Status | On/Off | Off |
Brake: Hardwire Input | Lamp Status | On/Off | On |
Change Oil Lamp | Inputs | On/Off | Off |
Check Gages Lamp | Inputs | On/Off | On |
Chk Gage: Low Fuel | Lamp Status | On/Off | Off |
Chk Gage: Low Oil PSI | Lamp Status | On/Off | On |
Chk: Gage: Temp Gage | Lamp Status | On/Off | Off |
Chk Gage: Volt Gage | Lamp Status | On/Off | Off |
Dimming Input | Data | Volts | Varies |
Hatch Ajar Switch | Inputs | Open/Closed | Closed |
Headlamps | Inputs | On/Off | Off |
Ignition 1 | Data | Volts | 9-16 Volts varies |
Low Oil Level | Inputs | Yes/No | No |
Low Trac: ABS Active | Lamp Status | On/Off | Off |
Low Trac: TCS Active | Lamp Status | On/Off | Off |
Low Trac: TCS Fail Msg | Lamp Status | On/Off | Off |
Low Trac: TCS Off Msg | Lamp Status | On/Off | Off |
Low Traction Lamp | Inputs | On/Off | Off |
Odometer | Data | miles/km | Varies |
Red Brake Lamp | Inputs | On/Off | On |
Reduced Performance Lamp | Inputs | On/Off | Off |
Restraints ID | Module Information | Numeric | Varies |
RPM | Data | RPM | 0 RPM |
Service Veh. Soon Lamp | Inputs | On/Off | Off |
Skip Shift Lamp | Inputs | On/Off | Off |
Software Release, Day | Module Information | Numeric | Varies |
Software Release, Month | Module Information | Numeric | Varies |
Software Release, Year | Module Information | Numeric | Varies |
Software Version | Module Information | Numeric | Varies |
SVS: Air Bag Fault | Lamp Status | On/Off | Off |
SVS: Class 2 | Lamp Status | On/Off | Off |
SVS: Lost 50H | Lamp Status | On/Off | Off |
TCS Off Lamp | Inputs | On/Off | Off |
Trip Reset Switch | Inputs | Active/Inactive | Inactive |
Vehicle Speed | Data | km/h (mph) | 0 km/h (0 mph) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF | |||
Engine Oil Level Switch | Engine Data 2 | OK/Low | OK |
Engine Oil Life Percent | Engine Data 2 | % | 0-100% - varies |
Fuel Tank Level Remaining | EVAP Data | % | 0-100% - varies |
Vehicle Speed Sensor | Engine Data 1 | km/h (mph) | 0 km/h (mph) |
