GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Camaro 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Front Floor Console Cup Holder Replacement

Removal Procedure
  1. Remove the front floor console. Refer to Front Floor Console Replacement .

    2. Object Number: 367410 Size: SH
  2. Lay the console upside-down on a work surface.
  3. Remove the cup holder screw.
  4. Remove the cup holder (2).
  5. Remove the cup holder spring (1), if necessary.

Installation Procedure

    Object Number: 367410 Size: SH
  1. Install the cup holder spring (1), if necessary.
  2. Install the cup holder (2).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the cup holder screw.

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  4. Install the front floor console. Refer to Front Floor Console Replacement .