GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Camaro 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Hazard Lamp Flasher Replacement

Removal Procedure
  1. Remove the instrument panel (IP) driver knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 294724 Size: SH
  2. Remove the retaining clip from the 48-way connector bracket.
  3. Remove the hazard lamp flasher from the retaining clip.
  4. Disconnect the electrical connector from the hazard lamp flasher.

Installation Procedure

    Object Number: 294724 Size: SH
  1. Connect the electrical connector to the hazard lamp flasher.
  2. Install the hazard lamp flasher to the retaining clip.
  3. Install the retaining clip to the 48-way connector bracket.
  4. Install the IP driver knee bolster. Refer to Driver Knee Bolster Replacement in Instrument Panel, Gages and Console.