Door Lamp Replacement Pontiac

1. Remove the door switch panel from the door.
2. Disconnect the switch electrical connectors.



3. Remove the screw from the inside handle bezel.
4. Remove the bezel.
5. Rotate the socket counterclockwise and remove the socket from the bezel.
6. Remove the bulb from the socket.

1. Install the bulb to the socket.
2. Install the socket to the inside handle bezel and rotate the socket clockwise to secure.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the bezel and secure with a screw.

Tighten
Tighten the screw to 1.4 N·m (12 lb in).

4. Install the door switch panel to the door.
5. Connect the switch electrical connectors.

Door Lamp Replacement Chevrolet

1. Remove the door switch panel from the door.
2. Disconnect the switches electrical connectors.



3. Remove the inside handle bezel screws.
4. Remove the inside handle bezel.
5. Rotate the socket counterclockwise and remove from the bezel.
6. Remove the bulb from the socket.

1. Install the bulb to the socket.
2. Install the socket to the bezel and rotate clockwise to secure.
3. Install the inside handle bezel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the inside handle bezel screws.

Tighten
Tighten the screws to 1.4 N·m (12 lb in).

5. Connect the switches electrical connectors.
6. install the door switch panel to the door.