GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 Camaro 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Transmission Floor Shift Control Indicator Lamp Replacement

Removal Procedure

    Object Number: 296126 Size: SH
  1. Open the console armrest door.
  2. Remove the bolts (2) from the transmission trim plate (1) of the floor console.
  3. Remove the transmission trim plate (1).
  4. Rotate the indicator lamp socket in a counterclockwise direction. Remove the socket from the transmission trim plate.
  5. Remove the bulb from the socket.

Installation Procedure

    Object Number: 296126 Size: SH
  1. Install the bulb to the socket.
  2. Install the socket to the transmission trim plate of the floor console. Rotate the socket clockwise to secure.
  3. Install the floor console transmission trim plate.
  4. Snap the trim plate (1) in place to secure the trim plate.

    5. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the bolts (2) to the transmission trim plate.

    6. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  6. Close the console armrest door.