--------- Some operators of 1991-92 B-car (Police Cars) (RPO 9C1) may experience a reduced front trim height condition.
----- Installation of additional equipment on the front of the vehicle, such as buddy bars/push bars, may increase vehicle mass to a point where a reduction in vehicle front trim height occurs.
---------- On vehicles that have been identified as not meeting front trim height specifications as shown in the applicable Service Manual Section 3 (Steering, Suspension, Tires and Wheel Diagnosis), replace existing front coil springs with new springs, P/N 22076514. Service procedure for removal and installation as indicated in applicable Service Manual Section 3C (Front Suspension) should be followed to ensure proper installation.
Parts are currently available from GMSPO.
Labor Operation Number: T1847
Labor Time: 2.0 Hrs.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.