STEERING WHEEL RETURNABILITY STEERING GEAR VALVE ASSEMBLY

SUBJECT: STEERING WHEEL RETURNABILITY (REPLACE STEERING GEAR VALVE ASSEMBLY)

VEHICLES AFFECTED: 1991 B CAR

CONDITION:

---------- On 1991 B-cars assembled prior to VIN breakpoint MW141646, comments may be received on slower steering wheel returnability, particularly during a low speed right turn maneuver.

CAUSE:

------ Incorporation of air bag restraint system into vehicle steering wheel results in off-centre mass distribution.

CORRECTION:

----------- Replace existing power steering gear valve assembly with applicable assembly noted below by suspension level and set vehicle caster to 3.5 +/- 1.0 degrees following Service Manual procedures.

Suspension Level Part Number ---------------- ----------- FE1 26025527

FE2 26025528

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.