SMU - SECTION 3C - REVISED TORQUE SPECIFICATIONS. Chevrolet Caprice 1995

REVISION: 06/12/95

THIS BULLETIN IS BEING REVISED TO ADD THE CADILLAC FLEETWOOD. PLEASE DISCARD CORPORATE BULLETIN NUMBER 53-33-02 (SECTION 3 - STEERING/ SUSPENSION). ---------------------------------------------------------------------- SERVICE MANUAL UPDATE ----------------------------------------------------------------------

SUBJECT: SECTION 3C - REVISED TORQUE SPECIFICATION FOR STEERING KNUCKLE NUTS (UPPER AND LOWER)

MODELS: 1993-95 BUICK ROADMASTER 1993-95 CADILLAC FLEETWOOD 1993-95 CHEVROLET CAPRICE 1994-95 CHEVROLET IMPALA SS

THE TORQUE SPECIFICATION FOR UPPER AND LOWER STEERING KNUCKLE NUTS SHOULD BE AS FOLLOWS:

TIGHTEN

. STEERING KNUCKLE NUT (UPPER) (1) TO 83 N.M (61 LB FT), ADDITIONAL TIGHTENING MAY BE REQUIRED TO INSERT COTTER PIN (3). DO NOT EXCEED 60 DEGREES ADDITIONAL TIGHTENING.

. STEERING KNUCKLE NUT (LOWER) (2) TO 112 N.M (83 LB FT), ADDITIONAL TIGHTENING MAY BE REQUIRED TO INSERT COTTER PIN (3). DO NOT EXCEED 60 DEGREES ADDITIONAL TIGHTENING.

FIGURES: 1

Object Number: 83974 Size: FS

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.