GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 1996 🢒 Caprice 🢒 Engine 🢒 Engine Electrical 🢒 Battery Tray

Removal Procedure
  1. Remove the battery. Refer to Battery Replacement .

    2. Object Number: 103329 Size: SH
  2. Remove the bolts/screws.
  3. Remove the battery tray nut.
  4. Remove the battery tray.

Installation Procedure

    Object Number: 103329 Size: SH
  1. Install the battery tray to the wheelhouse panel.
  2. Install the battery tray nut.
  3. Install the battery tray bolts/screws holding the battery tray to the wheelhouse panel.

    4. Tighten
    Tighten the battery tray bolts/screws to 25 N·m (18 lb ft).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the battery. Refer to Battery Replacement .