Important: The battery must be in a charged state to avoid misdiagnosis.

1. Turn the ignition switch to START.
2. Use a DVM in order to measure the voltage from the battery positive terminal to the starter solenoid switch terminal B.

Is the voltage less than specifications?

0.5 V

Go to Step 2

Go to Step 4

1. Turn the ignition switch to START.
2. Use a DVM in order to measure the voltage from the battery negative terminal to G100.

Is the voltage less than specifications?

0.5 V

Go to Step 3

Go to Step 5

Replace the starter solenoid switch.

Is the repair complete?

--

System OK

--

Replace the battery positive cable.

Is the repair complete?

--

System OK

--

Replace the battery negative cable.

Is the repair complete?

--

System OK

--