For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Caprice WM 🢒 Engine 🢒 Engine Cooling 🢒 Fastener Tightening Specifications

Fastener Tightening Specifications for Chevrolet Caprice WM 2008

Application	Specification
Application	Metric	English
Condenser to Radiator Retaining Bolt	11 N·m	97 lb in
Coolant Air Bleed Hose Retaining Clamp	4 N·m	35 lb in
Coolant Air Bleed Pipe Retaining Bolts	12 N·m	106 lb in
Coolant Inlet Pipe to Alternator Bracket Retaining Nut - 3.6L	25 N·m	18 lb ft
Coolant Recovery Reservoir Retaining Nuts	17 N·m	13 lb ft
Cooling Fan Blade Retaining Nut	6 N·m	53 lb in
Cooling Fan Motor to Fan Shroud Bolt	10 N·m	89 lb in
Coolant Inlet Pipe Retaining Bolt	35 N·m	26 lb ft
Heater Pipe Assembly to Thermostat Housing Retaining Bolts - 3.6L	10 N·m	89 lb in
Radiator Cap	5 N·m	44 lb in
Radiator Drain Plug	2 N·m	18 lb in
Thermostat Housing Retaining Bolts - 6.0L	14 N·m	124 lb in
Thermostat Housing to Cylinder Block Retaining Bolts - 3.6L	10 N·m	89 lb in
Water Pump to Engine Front Cover Retaining Bolts - 3.6	10 N·m	89 lb in
Water Pump Pulley to Water Pump Retaining Bolts - 3.6	10 N·m	89 lb in
Water Pump Retaining Bolts - 6.0L	25 N·m	18 lb ft
First Pass	15 N·m	11 lb ft
Final Pass	25 N·m	18 lb ft