Window Motor Programming and Setup
If the battery has been disconnected, recharged or replaced, it will be necessary to reprogram each power window for the express-up and express-down feature.
To program each front window, follow these steps:
- With the ignition in ACCESSORY, RUN, or in the retained accessory power (RAP) mode.
- Close all doors.
- Press and hold the power window switch until the window is fully open and continue holding the switch up for approximately two seconds after the window is completely open.
- Pull the power window switch up until the window is fully closed and continue holding the switch up for approximately 2 seconds after the window is completely closed.
The window is now reprogrammed. Repeat the process for the remaining windows.