GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Caprice WM 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Body Control Module Replacement

Body Control Module Replacement RHD

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

    2. Caution: Refer to SIR Caution in the Preface section.

  2. Disable the SIR system. Refer to SIR Disabling and Enabling .
  3. Remove the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  4. Remove the knee bolster. Refer to Knee Bolster Replacement .
  5. Remove the instrument panel retainer. Refer to Instrument Panel Retainer Replacement .

    6. Object Number: 1955544 Size: SH
  6. Disconnect the body control module (BCM) electrical connectors (1) from the BCM (2).

    7. Object Number: 1955546 Size: SH

    Important: Release the lower retaining clips (1), lift the BCM and unhook the upper retaining clip (2).

  7. Remove the BCM (3).

Installation Procedure

    Object Number: 1955546 Size: SH

    Important: Locate the upper retaining clip (2) and engage the lower retaining clips (1).

  1. Install the BCM (3).

    2. Object Number: 1955544 Size: SH
  2. Connect the body control module (BCM) electrical connectors (1) to the BCM (2).
  3. Install the instrument panel retainer. Refer to Instrument Panel Retainer Replacement .
  4. Install the knee bolster. Refer to Knee Bolster Replacement .
  5. Install the right closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .

    6. Caution: Refer to SIR Caution in the Preface section.

  6. Enable the SIR system. Refer to SIR Disabling and Enabling .
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  8. Re-programme the (BCM). Refer to Body Control Module Programming and Setup .

Body Control Module Replacement LHD

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

    2. Caution: Refer to SIR Caution in the Preface section.

  2. Disable the SIR system. Refer to SIR Disabling and Enabling .
  3. Remove the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  4. Remove the knee bolster. Refer to Knee Bolster Replacement ..
  5. Remove the instrument panel retainer. Refer to Instrument Panel Retainer Replacement ..

    6. Object Number: 1955548 Size: SH
  6. Disconnect the body control module (BCM) electrical connectors (1) from the BCM (2).

    7. Object Number: 1955549 Size: SH

    Important: Release the lower retaining clips (1), lift the BCM and unhook the upper retaining clip (2).

  7. Remove the BCM (3).

Installation Procedure

    Object Number: 1955549 Size: SH

    Important: Locate the upper retaining clip (2) and engage the lower retaining clips (1).

  1. Install the BCM (3).

    2. Object Number: 1955548 Size: SH
  2. Connect the body control module (BCM) electrical connectors (1) to the BCM (2).
  3. Install the instrument panel retainer. Refer to Instrument Panel Retainer Replacement .
  4. Install the knee bolster. Refer to Knee Bolster Replacement .
  5. Install the left closeout insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .

    6. Caution: Refer to SIR Caution in the Preface section.

  6. Enable the SIR system. Refer to SIR Disabling and Enabling .
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .