- Rotate the transmission 90 degrees. Remove the
shift shaft detent lever pin (601) from the case.
- Remove the manual shift shaft (606) from the
case.
- Disconnect the park pawl actuator assembly (613) from the manual
shaft detent lever (600).
- Remove the manual shaft detent lever (600), spacer (615) - some
models and the manual shaft shift switch assembly (602) from the case.
- Use a suitable tool in order to pry the shift shaft
seal (605) from the case.
- Remove the park pawl actuator assembly (613)
from the case.
- Remove the park pawl shaft (610), park pawl spring (611)
and the park pawl (612) from the case.
- Remove the park pawl actuator bracket retaining bolts (609)
from the case.
- Remove the park pawl actuator brackets (607, 608) from the case.
- Inspect the cup plug (614) for signs of leaks.