GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2008
🢒
Caprice WM
🢒
Body Hardware and Trim
🢒
Interior Trim and Paneling
🢒 Pressure Relief Valve Replacement
Removal Procedure
Remove the rear compartment floor panel carpet. Refer to
Rear Compartment Floor Panel Carpet Replacement
.
Remove the rear compartment side trim panel. Refer to
Rear Compartment Side Trim Panel Replacement
.
Remove the battery. Refer to
Battery Replacement
.
Remove the batter tray. Refer to
Battery Tray Replacement
.
Remove the rear bumper fascia. Refer to
Rear Bumper Fascia Replacement
.
From inside the rear compartment, press the retaining tabs (1) while pushing outward in order to release the pressure relief valve (2) from the rear quarter panel.
Installation Procedure
Position the pressure relief valve (2) to the opening in the rear quarter panel.
Press inward on the pressure relief valve until the retaining tabs (1) engage to secure the pressure relief valve (2) to the rear quarter panel.
Install the rear bumper fascia. Refer to
Rear Bumper Fascia Replacement
.
Install the battery tray. Refer to
Battery Tray Replacement
.
Install the battery. Refer to
Battery Replacement
.
Install the rear compartment side trim panel. Refer to
Rear Compartment Side Trim Panel Replacement
.
Install the rear compartment floor panel carpet. Refer to
Rear Compartment Floor Panel Carpet Replacement
.