GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Caprice WM 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Armrest Replacement

Removal Procedure
  1. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
  2. Remove the rear seat back folding. Refer to Rear Split Folding Seat Back Cushion Cover and Pad Replacement in Seats.
  3. Place the centre seat on a suitable work surface.

    4. Object Number: 1943518 Size: SH
  4. Lower the arm rest assembly (3) and disengage the trim flap (1) from the armrest hinge to obtain access to the retaining bolts (2).
  5. Remove the top two retaining bolts from the armrest hinge then loosen the two lower retaining bolts.
  6. Remove the armrest assembly (3) by sliding it up and out.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1943519 Size: SH
  1. Install the armrest assembly, to the seat back tray.
  2. Install the four attaching screws.

    3. Tighten
    Tighten the bolts to 4  N·m (35 lb in).

  3. Install the armrest trim flap (1) upper J-strip (2), to the upper part of the hinge bracket (3).
  4. Install the armrest trim flap (1) J-strip to the lower part of the hinge bracket (3).
  5. Install the rear centre seat back. Refer to Rear Split Folding Seat Back Cushion Cover and Pad Replacement in Seats.
  6. Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.